SciELO - Scientific Electronic Library Online

 
vol.41 issue3Piezoresistive pressure sensor model using the solution of an inverse optimization problem author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Article

Indicators

  • Have no cited articlesCited by SciELO

Related links

  • Have no similar articlesSimilars in SciELO

Share


Ingeniería Electrónica, Automática y Comunicaciones

On-line version ISSN 1815-5928

Abstract

ORTEGA GONZALEZ, Daryl; ARZOLA MORRIS, Pedro  and  SANDIANES GALVEZ, José R.. Modification to the AU11-07N slotted waveguide antenna of the Navy-Radar 4000. EAC [online]. 2020, vol.41, n.3, pp. 108-121.  Epub Dec 01, 2020. ISSN 1815-5928.

In marine and coastal radar applications it is usual to find antennas consisting of a slotted waveguide antenna and a horn antenna. To increase the effectiveness of the cuban coastal surveillance system, it is proposed to modify the AU11-07N slotted waveguide antenna of the Navy-Radar 4000 based on the design of an optimal pyramidal horn antenna, causing the half power beamwidth to be reduced by half in the vertical plane. To achieve the objective, the original antenna is measured and modeled to then simulate it in the Ansoft HFSS software and compare it with the data from the radar manual. Then, the original antenna is modified based on the design of an optimal pyramidal horn, simulated and adjusted to the final dimensions based on the variation in the length of its plates. With the proposed modification, the half power beamwidth is achieved for the vertical plane of 11,30o and for the horizontal plane of 0.71o, a secondary lobe level of -35 dB for the azimuth plane and a final gain of 34 dB, greater than that of the original antenna.

Keywords : slotted waveguide antenna; slot; coastal surveillance; horn; Navy-Radar.

        · abstract in Spanish     · text in English     · English ( pdf )