SciELO - Scientific Electronic Library Online

 
vol.13 número3Mejoras al programa de mantenimiento de máquinas deslodadoras para la extracción de aceite de palmaCoste del kWh eólico generado en Cuba, a partir de datos de viento de una región de buenos potenciales eólicos índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

FIGUEROA - HERNANDEZ, Carlos; DIEZ - CICERO, Carlos  y  ORDONEZ - HERNANDEZ, Urbano. Mathematical models to determine the contact fatigue during the micropitting formation. Ingeniería Mecánica [online]. 2010, vol.13, n.3, pp.33-37. ISSN 1815-5944.

The present work show the procedure that allow to obtain the mathematical models to determine the number of necessary cycles during the formation of micropitting in metals alloys subjected to contact fatigue. During obtaining of the models was takes into account the formation of undersurface microcracks where the maxims tangential tensions appear, which reach values over the yield point of materials. Microestructural defects such as grain and face boundary, graphite nodules, nom metallic particles were also considered to obtain the mathematical equations. Incubation period and propagation of crack on the material were described using an energetic balance. During the calculations it was considered that in the mechanism of crack initiation was present the movement of dislocations and the local increasing of stress. It was determined that irreversibility factor has a significant influence in the obtaining of mathematics model.

Palabras clave : micropitting; contact fatigue; mathematics model; defects; crack.

        · resumen en Español     · texto en Español     · Español ( pdf )