SciELO - Scientific Electronic Library Online

 
vol.17 número3Validación de la superficie de un intercambiador de calor compacto en configuración lisa utilizando un método numérico índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

GARCIA-BARBOSA, Jorge-Andrés; ARROYO-OSORIO, José-Manuel  y  CORDOBA-NIETO, Ernesto. Milling process planning of a complex workpiece using a virtual machine tool. Ingeniería Mecánica [online]. 2014, vol.17, n.3, pp.281-287. ISSN 1815-5944.

We designed and successfully manufactured a complex experimental piece composed of surfaces with zero, positive and negative curvatures. We planned and executed the machining manufacturing process by using milling process with end ball nosetools on a vertical machining center equippedwith a fourth external rotational axis. For planning, simulation and verification of the machining process,we developed a virtual model of the machine tool and its accessories in a commercial system for computer aided machining. By mounting the virtual manufacturing system, we verified the process and adjusted it until observe a good performance. We tested and confirmed the advantages of using the recent virtual methods for simulation and verification of the processoffered by various computer-aided machining systems, especially when dealing with complex processing components in machine tools withmore than three axes.

Palabras clave : virtual machine tool; process planning; complex parts machining; processes simulation and verification; multi-axis machining.

        · resumen en Español     · texto en Español     · Español ( pdf )