SciELO - Scientific Electronic Library Online

 
vol.20 número1Fabricación y caracterización de carburos de wolframio WC-X (X = Co, Ni) obtenidos por vía pulvimetalúrgica índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

BUITRAGO-SUESCUN, Oscar  y  DELGADO-TOBON, Arnoldo. Bonding of Sheets nitrile elastomer/Retamo Liso: Use of ecological adhesives with silane and halogen. Ingeniería Mecánica [online]. 2017, vol.20, n.1, pp.1-5. ISSN 1815-5944.

Bonded joint of composite sheets of nitrile butadiene rubber with Teline Monspessulana flour mercerized in proportion of 50 phr was studied, with the objective of testing ecological alternatives of adhesion. Two adhesives were used: water-based polyurethane and chloroprene dispersions, known as environmentally friendly. In the mechanisms used to bonding joint substrates of composites rubber/flour with adhesive, three surface treatments were tested: 3-aminopropyltriethoxysilane, vinyltrimethoxysilane and chlorinate based primers. To study the adhesion strength of the bonded joints, peel tests were performed.The specimens were then characterized by infrared spectroscopy FT-IR in order to establish the mechanism by which the adhesion of substrates. Analyses showed that the based-vinyltrimethoxysilane primer presented a better performance in adhesive bonding of polyurethane on the surface of the substrates, which was observed in the highest values of peel strength.

Palabras clave : teline monspessulana; NBR; primers; water-based polyurethane; water-based chloroprene.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons