SciELO - Scientific Electronic Library Online

 
vol.40 issue2Characterizing two-terminal devices using Remote Virtual InstrumentationTitulo en Inglés: Wireless Electronic System for Invalid Persons using Android devices author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Article

Indicators

  • Have no cited articlesCited by SciELO

Related links

  • Have no similar articlesSimilars in SciELO

Share


Ingeniería Electrónica, Automática y Comunicaciones

On-line version ISSN 1815-5928

Abstract

PEREZ ADAN, Darian; TORRES GOMEZ, Jorge  and  ALVAREZ CESAR, Flavia. Subspace-Based SNR Estimator for Cognitive Radio and Link Adaptation. EAC [online]. 2019, vol.40, n.2, pp. 49-61. ISSN 1815-5928.

Signal-to-Noise Ratio (SNR) parameter represents the main metric to characterize the performance of signal reception. Determining this parameter is of major importance for a wide variety of communication techniques such as spectrum sensing in Cognitive Radio, Link Adaptation, and power allocation. In general, there are two kinds of SNR estimation techniques: Data-Aided (DA) and Blind Estimation (BE). By using Data-Aided estimation (DA), the receiver estimates the SNR based on prior information from the transmitter. On the other hand, by using Blind-Estimation (BE), the receiver does not have any prior-knowledge of transmission parameters. This technique is extremely used for scenarios where transmission parameters are unknown, a common situation on spectrum sensing for non-cooperative applications in Cognitive Radio. However, some reported BE algorithms have been developed exploiting specific properties of some modulation schemes, which also demands some prior knowledge of signal parameters. This work is focused on describing SNR estimation algorithms suitable for several digital and analog modulation schemes. We propose the Subspace-Based SNR estimator for spectrum sensing by using the Energy Detector and Link Adaptation applications. Comparative simulation results regarding estimator performance exhibit the high precision for several channel models. The applicability of this estimator for several analog and digital modulation schemes is also shown as well as proper performance for low SNR levels is obtained, in exchange for higher computational complexity.

Keywords : Signal-to-Noise Ratio Estimation; Blind Estimation; Cognitive Radio; Energy Detector; Link Adaptation.

        · abstract in Spanish     · text in English     · English ( pdf )