SciELO - Scientific Electronic Library Online

 
vol.20 issue1Fabrication and characterisation of tungsten carbide WC-X (X=Co, Ni) obtained by powder metallurgy author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Article

Indicators

  • Have no cited articlesCited by SciELO

Related links

  • Have no similar articlesSimilars in SciELO

Share


Ingeniería Mecánica

On-line version ISSN 1815-5944

Abstract

BUITRAGO-SUESCUN, Oscar  and  DELGADO-TOBON, Arnoldo. Bonding of Sheets nitrile elastomer/Retamo Liso: Use of ecological adhesives with silane and halogen. Ingeniería Mecánica [online]. 2017, vol.20, n.1, pp. 1-5. ISSN 1815-5944.

Bonded joint of composite sheets of nitrile butadiene rubber with Teline Monspessulana flour mercerized in proportion of 50 phr was studied, with the objective of testing ecological alternatives of adhesion. Two adhesives were used: water-based polyurethane and chloroprene dispersions, known as environmentally friendly. In the mechanisms used to bonding joint substrates of composites rubber/flour with adhesive, three surface treatments were tested: 3-aminopropyltriethoxysilane, vinyltrimethoxysilane and chlorinate based primers. To study the adhesion strength of the bonded joints, peel tests were performed.The specimens were then characterized by infrared spectroscopy FT-IR in order to establish the mechanism by which the adhesion of substrates. Analyses showed that the based-vinyltrimethoxysilane primer presented a better performance in adhesive bonding of polyurethane on the surface of the substrates, which was observed in the highest values of peel strength.

Keywords : teline monspessulana; NBR; primers; water-based polyurethane; water-based chloroprene.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License