SciELO - Scientific Electronic Library Online

vol.22 issue1Operation costs of a machine of sowing direct author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand



  • Have no cited articlesCited by SciELO

Related links

  • Have no similar articlesSimilars in SciELO


Revista Ciencias Técnicas Agropecuarias

On-line version ISSN 2071-0054


ESTRADA CINGUALBRES, Roberto; ABALLES, Carlos Ricardo  and  PEREZ PUPO, Rafael. Dynamic analysis of the mechanism parallelogram of the cortacogollo desfibrador for the cropper Cuban CCA-5000. Rev Cie Téc Agr [online]. 2013, vol.22, n.1, pp. 05-11. ISSN 2071-0054.

This paper is a study of the state of stress-strain Analysis of shredder grinder parallelogram mechanism for Cuban sugar cane harvester CCA-5000. Was used the curve of variation of the extreme loads acting on the shredder, from experimental evaluation of the harvester model KTP-2M with the strain gauge over an obstacle, where dynamic coefficients that occur in the center of mass of this body were determined. Was used the Finite Element Method and through linear dynamic analysis was determined the causes of the plastic deformations appeared in the lower tube of shredder parallelogram mechanism in harvesting testing of the new harvester to be tensions 219.3 MPa in the same, being the elastic limit of the steel used 220 MPa. It checks the amendments made to the structure, giving a safety factor of 1.36 for the new model with a rectangular section lower tube, which ensures a reliable behavior of the same during the occurrence of the extreme loads during machine work.

Keywords : finite elements analysis; structural analysis; hint of obstacles; extreme loads.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )


Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License